Daily 101Home

Daily 101 Home · Episode 3

RADIATOR 101

Cold at the top? That’s air, not a broken radiator

  • 5 steps
  • Radiator key
  • Check the pressure

Scroll to fix it, step by step

RADIATOR 101

  1. 1heating off
  2. 2key & cloth
  3. 3open a little
  4. 4wait for water
  5. 5???the boiler pressure

Cold at the top and warm at the bottom means trapped air: you pay for heat you don’t get. Step five is the check almost everyone forgets.

Step 1

Heating off

Turn the heating off and let the radiators cool down.

The water inside can be hot enough to scald you.

Step 2

Key and cloth

Grab a radiator key (some modern valves take a flat screwdriver) and a cloth.

Find the little bleed valve at the top corner of the radiator.

Step 3

Open it a little

Hold the cloth under the valve and turn the key slowly anticlockwise, just a little.

Hear that hiss? That’s the trapped air escaping.

Common mistake

Opening it too far

Open the valve too far and dirty water sprays out. You lose more water than you need to, and the system pressure drops.

Step 4

Wait for water

When water drips out steadily, with no more air, close the valve clockwise.

Repeat on every cold radiator in the house.

The check almost everyone forgets

It’s not on the radiator

Every radiator you bleed lets some water out of the system. That shows up somewhere else entirely.

Step 5

The boiler pressure

Bleeding lets water out, so the pressure gauge on the boiler drops.

With the heating cold, it should usually read 1 to 1.5 bar. Too low? Top it up with the filling loop, exactly as your boiler manual shows.

Your boiler manual has the right figure for your system.

Still cold?

Cold at the bottom instead?

Cold at the bottom and warm at the top is usually sludge, not air. Bleeding won’t fix it: call a heating engineer.

Warm from top to bottom

No more paying for air.

Heating off, open a little, close on water, and check the boiler pressure.

Everything you need

Materials

  • Radiator key (or a flat screwdriver)1
  • Cloth or old towel1
  • Your boiler manualfor topping up

Safety

  • Heating off and radiators cool before you start: the water can scald.
  • Open the valve only a little, and close it as soon as water comes out steadily.
  • Top up the pressure only as your boiler manual shows. If in doubt, call a heating engineer.
  • Never touch the gas or electrical parts of the boiler.

Watch the Short

RADIATOR 101 on YouTube

Coming soon

More fixes like this one